Eilersen 5024G, User Manual

Page: 10 / 39

10
WWW.EILERSEN.COM
– Reading totals
In the MAIN screen
F
is pressed to select the TOTALS screen from the menu:
In this screen the totals are shown. Whenever a registration is performed the total weight is
updated with the registered amount and the total count is incremented.
Reset of totals
Totals are reset by pressing
F
to show the TOTALS menu, where the ” RESET TOTALS ” item is
selected with the cursor using the and keys and then pressing the key.
Please notice: Reset of totals can NOT be undone.
– Operate the menu system
The installation and service of the system is operated by a series of menus and screens.
Please see below in section
Appendix C – Screen overview, page 35, for an overview on all
screens. When using setup and maintenance screens these keys are used:
F
Select a menu depending on the actual screen.
Increase a value, select previous parameter or move cursor up in a menu.
Decrease a value, select next parameter or move cursor down in a menu.
Select entry or accept of a value, or select an action from a menu
.
Print
Clr
Return to previous screen. Exit menu without action.
Please notice: Parameters cannot be changed and actions not performed when the system is
powered on. Before such operations are possible the parameters must be unlocked as ex-
plain below in section
- Unlock for parameter update , page 11.
– Set date and time
It is possible to set the date and/or time of the internal clock by use of the SETUP menu. To
set date and/or time from the SETUP screen perform the following:
F
Press once to select the SETUP menu.
Press several times to select the “ SET DATE ” or “ SET TIME ” entry from the SET-
UP menu.
Press once to start entry of the selected parameter (date or time).