10
13.
MICROPHONE GRILLE
The grille protects the microphone capsule and includes a pop filter. The microphone capsule is dynamic
with a cardioid polar pattern.
14.
DISPLAY LCD
The LCD display shows various information:
a)
Frequency
b)
RF level of the transmitter
c)
Audio Gain of the transmitter
d)
Charge level of the battery. Three segments show the state of charge as a percentage. When the
voltage drops below 1.8 Volts the segments are not visible, and the icon starts flashing indicating
that the transmitter is shutting down.
15.
ON-OFF MUTE BUTTON
Press this button for 1 second and the transmitter starts working. To disable the sound of the transmitter,
press the ON-OFF button once the symbol appears on the display of the transmitter and receiver, a
subsequent press re-enables the sound, and the symbol disappears.
To turn off the transmitter, press the ON-OFF key
for one second and the message “OFF” appears on the
display.
16.
BATTERY COMPARTMENT COVER
17.
FREQUENCY TRANSMITTER
This label shows the operating frequency of the transmitter.
18.
IR
This is the IR infrared sensor port to receive channel settings from the RM1 receiver. Bring the transmitter
close to the IR port
to the receiver’s and expose the sensor
during the frequency sync procedure and to
transmit settings parameters.
19.
BATTERY INLET
Open the handheld microphone as show in figure to access at the battery compartment. Respect always
the polarity marked inside the battery compartment.
Summary of Contents for AETHER RM1
Page 1: ...RM1 Wireless Microphone System USER S MANUAL ENGLISH ITALIANO 96MAN00RM1 REV 09 21...
Page 26: ...26 FIG 1...
Page 27: ...27 FIG 2...
Page 28: ...28...
