Eiki LC-XT4E, Service Manual

Page: 42 / 160

- 42 -
Integrator lens-in unit removal.
1. Remove 2 screws A and remove the Integrator lens in unit.
2. Remove 4 screws B and remove the 2 Plates.
3. Unhook the holder 4 places and remove the Integrator lens. (Integrator lens is bonded on the Holder.)
(See Fig.13-1, 13-1a)
Unhook
Unhook
Unhook
Unhook
B
B
B
B
Integrator
lens-in
Integrator-lens-in
unit
A
A
Holder
Plate
Plate
Slot part comes this top side
* Lens should be placed as the rugged surface
side comes to the Holder side.
Rugged
surface
Lens bonded on the Holder.
13
-1
Fig.13-1
Fig.13-1a
Unhook
Unhook
Integrator-lens-out/
PBS unit
Integrator-lens-out
A
A
A
PBS
Holder
Plate
Plate
Slot part come this top side,
*Lens should be place
as the rugged surface
side comes to the Holder
side.
Film attached side comes to the this side.
B
B
B
B
Rugged surface
Lens and PBS bonded on the holder.
13
-2 Integrator lens-out / PBS unit removal.
1. Remove 3 screws-A and remove the Integrator lens out / PBS unit.
2. Remove 4 screws-B, remove the 2 Plates and remove the PBS.
3. Unhook the holder 4 places and remove the Integrator lens. (Integrator lens and PBS are bonded on the Holder.)
(See Fig.13-2, 13-2a)
Fig.13-2
Fig. 13-2a
Optical Unit Disassemblies