61
Shutter function is available to block out light to the screen, so that
the screen can be used for the other presenters.
Prohibit the shutter operation from the remote control and the
projector's side control.
Remote control
.... Selecting
On
prohibits the shutter
operation from the remote control.
Projector
................ Selecting
On
prohibits the shutter
operation from the side control.
It is possible to prohibit the shutter operation from both of the
remote control and the side control.
Protection
Standby mode Network
On start On
Pointer Dot
P-Timer
Security
Shutter
Video delay control Off
Filter counter
Test pattern
Factory default
Setting
Shutter
Off
Shutter
Protection
Projector
Remote control Off
Management 180 Min
Shutter
Management
Fig .1
Video delay : On
The Shutter Management function turns off the projection lamp
when the projector is left with the shutter closed and the set time
has passed away. The count-down time can be set between 5 and
180 minutes. When the count-down time has elapsed, the shutter
will be opened up automatically and the lamp will be turned off to
cool itself down. The SHUTTER indicator is blinking blue during this
cooling-off period. When the lamp has been fully cooled down, the
POWER indicator turns green lighting and the SHUTTER indicator
keeps blinking. Should the ON / STAND-BY button be pressed
in this condition, the projection lamp will be turned on and the
SHUTTER indicator turns off.
Note:
The Shutter Management function cannot be halted.
When you want to make a digital processing of a projected
image faster, set this function.
Use the Point ▲▼ buttons, select an item of
Off
/
Low
/
Mid
/
High
.
Digital processing speed becomes fast by order of Low → Mid →
High.
High
is the fastest.
Video delay control
Note:
-The following functions are not available respectively when Video delay
control is set to
Low
/
Mid
/
High
.
Low
...
Keystone
can not be selected.
Mid
...
Progressive
and
Noise reduction
can not be selected.
High
...
Keystone
,
Progressive
and
Noise reduction
can not be
selected.
-When Video delay control function is set to
Low
or
High
and press the
KEYSTONE button on the remote control, Fig.1 will be displayed on the
bottom left screen.
