55
This function allows you to change brightness of the screen.
Lamp control
HDMI setup
Terminal Computer 2
Pointer Dot
Standby mode Eco
Language English
Menu position
Input button Mode 1
Display On
Background Blue
Logo
Filter control
Fan control Normal
Simple mode On
Remote control Mode 1
RC sensor Back
Power management Off
Lamp control
Select the lamp operation when the total lighting time of a lamp
exceeds the recommended total hours of use.
Mode 1
............ A lamp can be turned on even after
exceeding the recommended total hours of
use.
Mode 2
............ A lamp can be turned on even after
exceeding the recommended total hours of
use. But the projector turns off automatically
after 3 minutes.
Lamp life control
Note:
• Lamp mode cannot be changed for a while after turning on the
projector. Lamp needs some time to stabilize after the power is
turned on. Stored lamp mode will be active after the lamp is sta-
bilized.
• If
Mode 2
has been selected and the projection lamp exceeds
the recommended total hours of use, the replacement icon will be
displayed at the time of power-on. Then the projector will turn off
after 3 minutes.
The Lamp replacement icon will not appear when the Display
function is set to
Off
(p.52), during
Freeze
(p.30), or
Shutter
(p.27).
Lamp replacement icon
Setting
Auto . . . . . Brightness according to the input signal.
Normal . . . Normal brightness.
Eco 1 . . . . Lower brightness and
decrease of fan speed.
Lower brightness reduces the lamp power
consumption and extends the lamp life.
Eco 2 . . . . Lower brightness and increase of fan speed.
Lower brightness reduces the lamp power
consumption and extends the lamp life. It is
recommended to use Eco 2 when using the
projector continuously over a long period of time.
The fan noise becomes louder in Eco 2 than in
Eco 1. Select the suitable mode for the used
environment.
Lamp control
Note:
The fan noise becomes louder in Eco 2 than in Eco 1.
Select the suitable mode for the used environment.
