34
Computer Input
This projector has the picture screen resize function, which enables you to customize the image size.
Press the MENU button and the On-Screen Menu will
appear. Press the Point
7 8
buttons to move the red frame
pointer to the Screen Menu icon.
1
Move the red frame to the
function and press the SELECT
button.
Press the Point
d
d
button and move the red frame pointer to
the function that you want to select and then press the
SELECT button.
2
✔
Note:
• This Screen Menu cannot be operated when 720p(HDTV),
1035i (HDTV), or 1080i (HDTV) is selected in the PC
System Menu (p28).
• The True and Digital zoom +/– cannot be selected when
480i, 575i, 480p, or 575p is selected in the PC System
Menu (p28).
• This projector cannot display any resolution higher than
1280 X 1024. If your computer’s screen resolution is higher
than 1280 X 1024, reset the resolution to the lower before
connecting to the projector.
• The image data in other than XGA (1024 x 768) is modified
to fit the screen size in initial mode.
• The panning function may not operate properly if the
computer system prepared in the PC Adjust Menu is used.
• When Auto setup function is "On" and used any of the Auto
setup function, Digital zoom +/- function will be canceled
then the screen will go back to the normal size.
• When selecting VGA, SVGA or SXGA in the Computer System
Selection (p28) with adjusting Keystone function uppermost
in the upward direction, the Digital zoom - function may not
work.
Screen Menu
Screen Menu icon
Screen Size Adjustment
When the Digital zoom + is selected, the On-Screen Menu
disappears and the message “D. Zoom +” is displayed. Press the
SELECT button to expand the image size. And press the Point
e
ed
d7 8
buttons to pan the image. The Panning function can work
only when the image is larger than the screen size.
A projected image can be also expanded by pressing the D.ZOOM
▲
button on the remote control.
To exit the Digital Zoom +/– mode, press any button except the
D.ZOOM
▲
/
▼
, SELECT, and Point buttons.
Wide
Digital zoom +
Provide the image to fit screen size.
Normal
True
When the Digital zoom – is selected, the On-Screen Menu
disappears and the message “D. Zoom –” is displayed. Press the
SELECT button to compress the image size.
A projected image can be also compressed by pressing the
D.ZOOM
▼
button on the remote control.
Digital zoom –
Provide the image in its original size. When the original image size
is larger than the screen size (1024 x 768), this projector enters
“Digital zoom +” mode automatically.
Provide the image to fit wide video aspect ratio (16 : 9) by
expanding image width uniformly. This function can be used for
providing a squeezed video signal at 16 : 9.
To return to the normal screen select Normal from the Screen
menu.
POINTER
Remote Control
D.ZOOM
e
e
button
POINT buttons
SELECT button
D.ZOOM
d
d
button
