LC-SM1
9
PREPARATION
POSITIONING THE PROJECTOR
• This projector is designed to project on a flat
ROOM LIGHT
projection surface.
The brightness in the room has a great
• The projector can be focused from 4.6’ (1.4m) 26.3
influence on the picture quality. It is
(8.Om).
recommended to limit ambient lighting in
• Refer to the figure below to adjust the screen slze.
order to provide the best image.
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by rotating
the ADJUSTABLE FEET. Projection angle can be adjusted
to 7.6 degrees.
1
Lift the front of the projector and pull the FEET LOCK
LATCHES on both sides of the projector.
2
Release the FEET LOCK LATCHES to lock the
ADJUSTABLE FEET and rotate the ADJUSTABLE FEET
to fine tune the position and the tilt.
3
To shorten the ADJUSTABLE FEET, lift the front of the
projector and pull and undo the FEET LOCK LATCHES.
The position and the keystone distortion of the image can
be adjusted using the Menu Operation. (Refer to P 20,
28 and 30.)
