Eiki LC- NB2UW, Owner'S Manual

Page: 7 / 39

LC-NB2UW
7
POSITIONING THE PROJECTOR
• This projector is basically designed to project on a flat projection surface.
• The projector can be focused from 4.6’(l .4m) 35.4’(l 0.8m).
• Refer to the figure below to adjust the screen size.
ROOM LIGHT
The brightness in the room has a great influence on the picture quality. It is recommended to limit ambient lighting in order
to provide the best image.
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by rotating the
ADJUSTABLE FEET. Projection angle can be adjusted to 10
degrees.
1
Lift the front of the projector and pull the FEET LOCK
LATCHES on both sides of the projector.
2
Release the FEET LOCK LATCHES to lock the
ADJUSTABLE FEET and rotate the ADJUSTABLE
FEET for fine tune of the position and the tilt.
3
To shorten the ADJUSTABLE FEET, lift the front of the
projector and pull and undo the FEET LOCK
LATCHES.
The position and the keystone distortion of the image can be
also adjusted with the Menu Operation. (Refer to P 20, 28
and 29.)