Eiki LC- NB2UW, Owner'S Manual

Page: 32 / 39

LC-NB2UW
32
The Wireless Remote Control Unit is not only able to operate the projector but also usable as a wireless mouse for most
Personal Computers. The POINT buttons and the two CLICK buttons are used for the wireless mouse operation.
The wireless mouse is usable when PC mouse pointer is displayed on the screen. When the menu or the indicator of the
projector is displayed on the screen instead of the PC mouse pointer, the wireless mouse cannot be used.
INSTALLATION
To use the Wireless Remote Control Unit as the Wireless Mouse for a Personal Computer, installation of the mouse driver
(not supplied) is required. Make sure that the mouse driver is properly installed in your computer. And make sure that the
mouse port of the computer connected to Control Port is activated.
1
Connect the mouse port of your computer to the Control Port of
the projector with the Control Cable. (Refer to page 10 to 13 for
connection.)
2
Turn the projector on first, and then turn on your computer.
When the computer is switched on first, the Wireless Mouse
may not work properly.
OPERATING WIRELESS MOUSE
When controlling the pointer of the computer, operate the Wireless
Mouse with POINT button, SELECT button, and RIGHT CLICK button
on the Wireless Remote Control Unit.
POINT button
Used to move the pointer. The pointer is moved corresponding with the
direction you are pressing.
SELECT (LEFT CLICK) button
This button has the same function as the left button in a PC mouse.
RIGHT CLICK button
This button has the same function as the right button in a PC mouse.
Pressing this button dose not affect any operation when in Menu
mode.
Note: When the computer has no
mouse port, connect the Serial
Port of the computer to Control
Port of the projector with the
Control Cable for Serial Port.