Eiki EK-610U, Owner'S Manual

Page: 49 / 90

—
34
—
DLP Projector — Owner’s Manual
Output Menu
Press the
Menu
button to open the OSD menu. Press the arrow keys (
pq
) to select
OUTPUT
and press
the
Enter
button to enter the
OUTPUT
menu. Press the arrow keys (
pq
) to select the menu option
and press the
Enter
button to enter its submenu. Press the arrow keys (
pqtu
) to select or adjust the
desired settings and press the
Enter
button to confirm.
Aspect Ratio
Overscan
H Digital Zoom
V Digital Zoom
H Digital Shift
V Digital Shift
Image Warping
PIP/PBP
PICTURE
OUTPUT
SETUP
OPTION
OUTPUT
Auto
Off
100
100
50
50
I
tem
D
escrIptIon
Aspect Ratio Display an image with the detected size, or resize the image by maximizing
either the height, width or both, or resize to the maximum size possible
while keeping the original aspect ratio.
Overscan Remove noise around the image. Overscan Zoom enlarges image 3%
from original size. Overscan Crop cuts 3% of active pixels in four edges of
original image.
H Digital Zoom Change the size of projector’s display area horizontally. If the display area
has been resized by this setting, it can be moved by changing the H Digital
Shift and V Digital Shift settings.
V Digital Zoom Change the size of projector’s display area vertically. If the display area has
been resized by this setting, it can be moved by changing the H Digital Shift
and V Digital Shift settings.
H Digital Shift Move the display area horizontally if its size has been changed by the
Digital Zoom setting.
V Digital Shift Move the display area vertically if its size has been changed by the Digital
Zoom setting.
Image Warping Configure the image warping settings. See “Image Warping Menu” on page
35.
PIP/PBP Configure the PIP/PBP settings. See “PIP/PBP Menu” on page 36.