—
33
—
DLP Projector — Owner’s Manual
Advanced Menu
Press the
Menu
button to open the OSD menu. Press the arrow keys (
pq
) to select
PICTURE
and press
the
Enter
button to enter the
PICTURE
menu. Press the arrow keys (
pq
) to select
Advanced
and press
the
Enter
button to enter the
Advanced
menu. Press the arrow keys (
pq
) to select the menu option
and press the
Enter
button to enter its submenu. Press the arrow keys (
pqtu
) to select or adjust the
desired settings and press the
Enter
button
to confirm.
White Peaking
Gamma
Color Temperature
Color Space
Color Settings
Film Mode
DynamicBlack
TM
PICTURE
OUTPUT
SETUP
OPTION
Advanced
100
Video
Bright
Auto
Off
Off
I
tem
D
escrIptIon
White Peaking
(Video source only) Increase the brightness of whites that are near 100%.
Gamma
Select the appropriate gamma from Film, Video, Graphics, and Standard.
Color Temperature
Change the intensity of the colors. Select a listed relative warmth value.
Color Space
Select a color space that has been specifically tuned for the input signal.
Use only for analog signals and certain digital sources.
Color Settings
Adjust the gain of the red, green, or blue channel of the image. It will affect
the black and white.
Adjust the offset of the red, green, or blue channel of the image. It will affect
the black and white.
Reset RGB gain/offset to return the factory default settings for color
adjustments.
Film Mode
Control film mode detection and determine whether the original source of
the input video was film or video.
DynamicBlack
TM
Enable or disable the dynamic black function. Enable this function raises
the contrast ratio dynamically.
