Eiki EK-610U, Owner'S Manual

Page: 45 / 90

—
30
—
DLP Projector — Owner’s Manual
Picture Menu
Press the Menu button to open the OSD menu. Press the arrow keys (
pq
) to select PICTURE and press
the Enter button to enter the PICTURE menu. Press the arrow keys (
pq
) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (
pqtu
) to select or adjust the
desired settings and press the Enter button to confirm.
Display Mode
Brightness
Contrast
Sharpness
Color
Tint
Phase
Frequency
Horz Position
Vert Position
PICTURE
OUTPUT
SETUP
OPTION
PICTURE
Presentation
50
50
2
50
50
50
50
50
50
I
tem
D
escrIptIon
Display Mode Optimize the projector for displaying images under certain conditions, such
as Presentation, Video, Bright, 2D High Speed, 3D, and user-definable
preset.
Brightness Adjust the intensity of the image.
Contrast Adjust the degree of difference between the lightest and darkest parts of
the picture and change the amount of black and white in the image.
Sharpness Select the edge clarity of the image.
Color Adjust a video image from black and white to fully saturated color. The color
setting applies to video sources only.
Tint Adjust the red-green color balance in the image of video images. The tint
setting applies to video sources only.
Phase Analog signals only. Adjust pixel phase when the image still shows shimmer
or noise after pixel tracking is optimized. Pixel phase can adjust the phase
of the pixel-sampling clock relative to the incoming signal.
Frequency Analog signals only. Steady flickering or several soft vertical stripes or
bands across the entire image indicates poor frequency. Proper frequency
ensures that the image quality is consistent across the screen, the aspect
ratio is maintained, and that the pixel phase can be optimized.
Horz Position Move the image right or left within the area of available pixels.
Vert Position Move the image up or down within the area of available pixels.
Auto Image Force the projector to reacquire and lock to the input signal. This is useful
when signal quality is marginal.
3D Display Configure the color management settings. See “3D Display Menu” on page
31.
HSG Adjustment Configure the color management settings. See “HSG Adjustment Menu” on
page 32.
Advanced Configure the advanced image settings. See “Advanced Menu” on page
33.