Eiki EK-600LU, Owner'S Manual

Page: 49 / 85

49
OSD setting-Expand

Note:
● The adjusted value will be reset when you swith the keystone correction with another one.
● The "Curved Correction X Offset" and the "Curved Correction Y Offset" can not be adjusted
independently. After adjusting the "Curved Correction X/Y Gain" at the beginning, please adjust the
"Curved Correction X Offset" and "Curved Correction Y Offset".
● Correcting up to ±30° for the tilt in the vertical direction and ±15° for the tilt in the horizontal direction
are available for adjustments with "Keystone". However, the image quality will degrade and it will get
Curved correction
Adjust when the linearity is not uniform or the vertical and horizontal lines are distorted.
Press▲▼◄►to adjust the item.
Reset value
Return the corrected values to the factory default values.
Press▲▼to select "Reset value", and then press the OK button, the state of the keystone correction is
released.
Items Operation Adjustment
Curved correction
- X/Y Gain
Press
the◄ & ►
button
Adjust the right & left of
the width
Press
the▲ & ▼
button
Adjust the top & bottom
of the width
Curved correction
- X Offset
Press
the◄ / ►
button
Adjust the left / right of
the distortion
Press
the▲ / ▼
button
Adjust the top / bottom
of the distortion
Curved Correction
- Y Offset
Press
the◄ / ►
button
Adjust the left / right of
the distortion
Press
the▲ / ▼
button
Adjust the top / bottom
of the distortion
Grid image tune
Correc the image via grid point.
Press▲▼◄►to adjust the selected grid point.
4-direct correction
▲ Move Up ▼ Move Down ◄ Move Left ► Move Right
harder to focus with more correction. Install the projector so that the
correction will be as small as possible.
● Screen size will also change when "H/V Keystone" is used to
perform various adjustments.
● Aspect ratio of the image size may shift depending on the correction.