45
Expand
Keystone menu
This function is used to store or reset the
keystone correction when the AC power cord is
unplugged.
1 Press MENU button on the remote control
to display screen menu. Press
button
to select "Expand", then press the OK button.
2 Press
button to select "Keystone", press
the OK button.
3 Press
button to select the item you want
to set, press the OK button.
Expend
Keystone
Keystone
H/V Keystone
Corner correction
Curved correction
Reset value
Store
Keystone
Sets whether or not to keep the keystone
correction after turn off the projector or plug out
the power cord.
H/V Keystone
Adjust when the horizontal or vertical trapezoid of the projected image is distorted.
Store ..... The keystone correction will be kept when plug out the power cord or turn off the
projector.
Reset .... The keystone correction will be reset.
Keystone
Corner correction
Adjust when the four corners of the projected image are distorted.
Press▲▼◄►to adjust the item.
Note:
● The white arrows indicate that there is no correction.
● A red arrow indicates the direction of correction.
● An arrow disappears at the maximum correction.
Note:
When you select "Store", it is recommended to select "Manual" or "Off" in Auto Keystone of Auto setup.
(Refer to Page 44)
Corner correction
Upper left
Upper right
Lower left
Lower right
Reduce the upper
width with
button.
Reduce the left
width with
button.
Reduce the right
width with
button.
Reduce the lower
width with
button.
Summary of Contents for EK-308U
Page 1: ...OWNER S MANUAL EK 308U EK 309W Vol 1 0 ...
Page 83: ......
