18
Note:
*In most situations, you can simply point the remote control at the screen which will reflect the IR sig
-
nal from the remote back toward the IR receiver on the projector. In some cases, however, ambient
light may prevent this. If so, try again.
*If the effective range of the remote control decreases, or it stops working, replace the batteries with
new ones.
*The remote control may fail to operate if the infrared remote sensor is exposed to bright sunlight or
fluorescent lighting.
Remote Control Battery Installation
1
2
3
1. Slide the battery cover to remove it.
2. Install two AA(2) batteries with the correct polarity.
3. Put back the cover.
Note:
*Make sure that the battery polarities are correct when installing the batteries.
*Do not mix an old battery with a new one or different types of batteries.
*Avoid contact with water or liquid.
*Do not expose the remote control to moisture or heat.
*Do not drop the remote control.
*If you will not use the remote control for a long time, remove the batteries to avoid damage from bat-
tery leakage. Please wipe the remote control clean and install new batteries if the battery is leaked.
*Dispose of used batteries according to the instructions or your local disposal rule or guideline.
