35
Multi Screen
Setting up the Multi Screen Controlling
When you want to control the monitors collectively for the multi screen, connect LAN cables to the LAN
terminals and set both “TCP/IP” and “Master & Slave”.
Following is an example of how to use 4 monitors with a hub connection.
Info
•
To set up the multi screen, assign a monitor as the master and the other monitor as the slave and connect
the monitors with LAN cables (supplied). In this way, you can control the both monitors with one remote
control.
•
The buttons below can control both the master and the slave at one time.
• ON button
• AUTO SYNC button
• STANDBY button
• RESIZE button
• DIRECT INPUT buttons
• AV MODE button
(COMPUTER1, COMPUTER2, DVI, • FREEZE button
HDMI, S-VIDEO, VIDEO)
• P&P button
• AV MUTE button
• SELECT button
• VOLUME buttons
•
In normal operation, the monitor set as the slave cannot be controlled by the remote control.
•
Even while the monitor is set as the slave, the buttons on the monitor can be used.
Monitor 1 : Master
Monitor 3 : Slave
Monitor 2 : Slave
Monitor 4 : Slave
Computer
LAN cable
(cross-over type,
commercially available)
Hub
LAN terminal
LAN terminal
LAN terminal
LAN terminal
LAN cable
(supplied)
