32
Multi Screen
Setting up the Multi Screen Input Signal
Following is an example of how to use 4 monitors.
Video equipment
Monitor 1
Computer
Computer
RGB cable (commercially available)
MONITOR OUT
terminal
COMPUTER IN 2
terminal
MONITOR OUT
terminal
COMPUTER
IN 1 terminal
S-VIDEO IN
terminal
S-VIDEO IN
terminal
S-VIDEO IN
terminal
S-VIDEO IN
terminal
Monitor 2
RGB cable (commercially available)
MONITOR OUT
terminal
RGB cable (commercially available)
RGB cable (commercially available)
Monitor 3
Monitor 4
Distributor
COMPUTER
IN 1 terminal
COMPUTER
IN 1 terminal
COMPUTER
IN 1 terminal
5BNC to mini D-sub 15 pin
cable (commercially available)
S-VIDEO cable (commercially available)
Info
•
Depending on the input signal, Auto Sync adjustment of the multi screen using the MONITOR OUT terminal
may not be possible. Note the following.
- The multi screen is not compatible with resolutions higher than SXGA.
- Adjust “H-Position”, “V-Position”, “Clock” and “Phase” manually. (See page
36
on the owner’s manual of
the monitor.)
- If the image quality deteriorates, use a distributor (commercially available).
•
For the VIDEO, S-VIDEO, DVI-D or HDMI signal, use a distributor (commercially available).
