EIJKELKAMP 18.65.01, User Manual

Page: 100 / 115

The Menus
bbe AlgaeTorch Manual Page 99
The first and last point in time have to be entered.
Hint: For more information on scaling an axis please see the "window" section in this manual.
In case of a “non-time axis”, more possible adjustments are available:
Manual scaling:
enter fixed values for the minimum and the maximum of this axis - enter 0 for both to
disable this feature.
Auto scale limits these settings are used to obtain a nice looking graph in two special situations:

data sets with very low noise:
In the auto-scaling mode, the graph looks as if there are extreme variations, but the range
is very small due to the auto-scaling. In this case, it is better to use the options:
lower limit:
lower than and
upper limit: higher than
This leads to a minimum span in the graph.

data sets with outliners:
In this case, it is difficult to analyse the data because the auto scaling generates a high
span value. To prevent this, please use the
lower limit:
higher than for outliners with low values and
upper limit: lower than for outliners with high values
This leads to an optimised span in the graph.
Autoscaling
Enables the auto-scaling feature. The axis will be scaled so that all selected data are visible.