6
Setting
Page 26 / 52
6.5 Parameter logic
The factory default parameters of the ten memory modes are shown in
the table below. The parameters can be adjusted as needed.
The default advanced settings parameters are shown in the following
table. The parameters can be adjusted as needed
Parameter
M0 M1 M2 M3 M4 M5 M6 M7 M8 M9
Operation
mode
REC Fwd Fwd Fwd Fwd Fwd Rev Rev Fwd Fwd
Speed(rpm)
N/A 350 300 400 400 300 350 500 500 650
Torque(N·cm)
N/A 2.5 3.0 2.0
1.5 1.5 2.5 2.0 2.5 2.0
Fwd angle
30 N/A N/A N/A N/A N/A N/A N/A N/A N/A
Rev angle
150 N/A N/A N/A N/A N/A N/A N/A N/A N/A
The default advanced settings parameters are shown in the following
table. The parameters can be adjusted as needed.
Volume
BEEP VOL
Mid
Auto calibrate
Calibration
Off
Auto power
off
AUTO P.W.R
10min
Restore settings
Restore Setting
Off
Auto set
confirm
SET TIME
5s
/
/
Hand habit
Habit Hand
Right
/
/
