6
Setting
Page 19 / 52
NOTE
In different operation modes, the values of parameters will be
different according to the corresponding logic
(Adjust
parameters according to chapter 7.2)
.
M 1
TRQ
SPEED:
400
+
-
In M1-M9 memory mode, the s-
peed can be 120rpm-650rpm. Pr-
ess
S
at standby mode till sp-
eed (
①②
) is displayed,press
+
or
-
to set，then press
●
or
wait for 5 seconds to confirm. T-
he left figure (
③
)means after pr-
essing
S
again will enter torq-
ue(TRQ) setting.
M 1
R D
·
TORQUE:
3.0
+
--
The torque value can be set from
0.5 to 4.0 N·cm. Press
S
at st-
andby mode till torque (
①②
) is
displayed, press
+
or
-
to
set, then press
●
or wait for 5
seconds to confirm. The left fig-
ure (
③
) means after pressing
S
again will enter rotate direction
(R.D.) setting mode.
