15
Switching the device off
In order to switch off the device, disconnect the plug from the socket.
CAUTION!
Risk of physical injury and material damage if used incorrectly!
The surface of the heater will still be hot when the device is switched off!
Do not touch the heater or place it on heat-sensitive surfaces.
Tip:
The device should be placed in cold or warm water immediately after use.
This facilitates cleaning of the heater and the heater cools down evenly.
6. Cleaning
CAUTION!
Risk of physical injury and material damage if used incorrectly!
Disconnect the power cord and let the heater cool down before you begin cleaning.
The device must be cleaned after each use.
The device should be placed in cold or warm water immediately after use. This facilitates cleaning of the
heater. The heater can be cleaned using a soft sponge cloth (do not use scrubbing brushes, wire brushes,
wire wool or other abrasive cleaning tools) and lukewarm, soapy water. To clean the handle and the
immersion pipe, use a soft, damp cloth that must be completely free of solvents (acetone, petrol, alcohol
or similar).
7. Maintenance and repair
The device does not require maintenance, but should be thoroughly cleaned at regular intervals. In the event of a
fault, the device must be taken out of use immediately. If a repair is required, please contact a qualified electrician
or send the device for repair to the manufacturer. A faulty connecting cable should also only be replaced by the
manufacturer or a qualified electrician. Only use original spare parts.
8. Technical data
Model:
MTH 160
Output:
2300 W
Voltage:
230 V
Protection class:
IPX7
Weight:
2.7 kg
Height:
86 cm
Heater diameter:
16 cm
Minimum immersion depth:
13 cm
Maximum immersion depth:
75 cm
Temperature control range:
0 - 95 °C
Subject to technical modifications and amendments.
12.11.2015 16:18:02
Summary of Contents for 0313-000
Page 1: ......
Page 47: ...12 11 2015 16 18 15 ...
