DHCP server configuration
System Administrator’s Guide
41
•
Enter IP address of the WINS server to be distributed to DHCP clients in the
WINS Address
field.
•
Enter the
Default Lease Time
and
Maximum Lease Time
in seconds. The
lease time is the time that a dynamically assigned IP address is valid.
•
Enter the IP address or range of IP addresses to be issued to DHCP clients
in the
Initial Dynamic IP Address Range
field.
To take advantage of the Shiva VPN Gateway's DHCP server functionality, you should
configure the other machines on your local network to get their IP addresses
dynamically from the Shiva VPN Gateway. Please refer the documentation for the
other machines for instructions on how to configure the local network port.
4. Click
Apply
to save these settings. A page similar to the following will be
displayed.
•
Interface: Once a subnet has been configured, the port which the IP
addresses will be issued from will be shown in the Interface field.
•
Subnet: The value shown in this field is the subnet for which the IP
addresses distributed will use.
•
Free Addresses: This field will contain the number of remaining available IP
addresses that can be distributed. You may need to increase the number of
IP addresses to hand out if this value is 0.
•
Enable/Disable: Each subnet can be enabled or disabled by clicking on the
Enable or Disable button under the Enable/Disable heading.
•
Edit: The settings for each subnet can be modified by clicking the Edit button.
You will also have the option to add more IP addresses that can be handed
out and add reserved IP addresses as well.
•
Delete: The settings for the subnet can be removed by clicking the Delete
button.
Summary of Contents for SHIVA 1100
