Management settings
108
System Administrator’s Guide
Administrative Contact
Can be any text value. This value will be shown under "Administrative contact" in the
CMS.
Device Location
Can be any text value. This value will be shown under "Device Location" in the CMS.
Syslog Remote Port
Specifies the port on which to listen for syslog messages. The default value (514) is
the standard syslog port, however there may be reasons to use a different port, in
which case the same value must be specified in the CMS configuration.
Syslog Filter
Choose the type of messages that will be logged.
Local names
To reach this page click
Management
under
System
on the left menu, the click the
Local Names
tab.
Summary of Contents for SHIVA 1100
