Eicon Networks 800-241, User Manual

Page: 35 / 52

Commands, Codes, and Protocols 35
Error Correction Commands
Italicized n or x denotes options to be supplied by user or software.
&Sn DSR control options &S0
&Tn Diagnostic test control &T5
&V Display current configurations —
&Wn Save current profile in memory —
&Yn Recall stored profile on power up &Y0
&Zn=x Store dial string n (to 34) to location x (0 - 3). —
%En Control line quality monitor and auto retrain. %E2
%L Return received line signal level. —
%Q Report the line signal quality. —
\Kn Controls break handling. \K5
\Nn Mode selection. \N3
\Vn Connect message format control. \V0
+MS Select modulation. —
Command Function Default
%Cn Enable/disable data compression. %C3
\An Set maximum block size \A1
\Bn Send break of n x 100 ms. —
)Mn Cellular power level )M0
*Hn MNP 10 link negotiation selection H0
-Kn Enable/disable MNP 10 extended services -K0
-Qn Fall back to V.22 bis/V.22 -Q1
-SEC=n Enable/Disable MNP10-EC -SEC=0
@Mn Select initial transmit level @M0
:En Enable/disable the compromise equalizer :E1
Command Function Default