11
Shutter release
In the operation, you can
"freeze" or "unfreeze" images
using shutter release.
5.4 Bind the Arm-Band
Bind the armband with figure’s method and instructions.
1. According to arrow direction, extend your arm
into armband, or disconnect the armband to put
on your arm, the long end through the back ring.
2. According to arrow direction, strain one end of
armband and stick it firmly on the Velcro.
Armband back ring
Arm-Band
5.5 Connect to power
1. Connect to the power adapter
Insert the output plug of adapter into DC power input interface, which is on the left of main unit.
2. Connect to the main power supply
Insert the power plug (jack) furnished with the machine into power input socket of the power adapter, the other end to
the main power supply. The instrument uses three-core power supply. It connects with the protective earth line when
power plug inserts into its socket.
5.6 Video printer installation
1. Connect the equipotential terminal (
) of the video printer to the earthing;
2. Connect one end of the video connection line to the video printer and the other end to the video output interface on the
left of main unit;
3. Insert one end of power plug (jack) of the video printer to the power input socket of the video printer, the other end to
the power supply socket.
5.7 Connect to the mouse
Connect the mouse to USB interface on the right side of the main unit.
5.8 Probe check before and after operation
Warning:
1. Adapter has no switch. The isolation of the system with the MAINS used to unplug the
adapter as the intended isolation means.
2. The device should be used only with power adapter provided by Eickemeyer Company.
3. To avoid damaging power adapter or harming people by unexpected fallen, make sure the
power adapter is placed on the leveled desk.
