301801 • 1/2021 • H.S.
9 of 48
Operating Instruction
High Pressure Cleaner cold water, mobile
Series 2x2
1 User information
1.7
Warranty and Liability
The EHRLE High Pressure Cleaner cold water, mobile - Series 2x2 may only be
used for its intended purpose.
Intended use includes:
●
Operation only by authorised persons who
○
are instructed and trained on the device, or
○
have completely read and understood the information and
instructions in this Installation and Operating Instruction and
can therefore guarantee safe handling of the device.
●
The information and instructions contained in this manual must be
observed.
●
If the safety and protective devices are faulty, the high pressure cleaner
must not be put into operation.
●
The high pressure cleaner may only be operated with fully functional safety
and protective devices. In the event of functional failures during operation,
the high pressure cleaner must be taken out of operation immediately.
●
Faulty, insufficient or defective high pressure cleaners must not be put into
operation. Before commissioning, carry out a visual inspection for faulty or
defective
○
device parts, assemblies or components
○
electrical cables
○
HP-Hoses.
●
The high pressure cleaner must be switched off immediately and taken out
of operation if defects, faults or deficiencies occur on
○
device parts, assemblies or components
○
electrical cables
○
HP-Hoses.
●
No constructive changes may be made to the device.
●
The device may only be operated in the configuration certified by the
manufacturer. Operation with subsequently installed modules, components
or additional devices is not permitted and may endanger life and limb of
persons or lead to damage to the device.
●
Only original parts from the manufacturer or consumables approved by the
manufacturer may be used for maintenance and repair work.
Any warranty and liability claims for personal injury and damage to the device
are void if the high pressure cleaner is not used for its intended purpose.
