6. Menu description
6.1. Program:
PROGRAM
P : 0 1S : 0 1
Here you can chose which internal program you want to start in the automatic mode.
Push Enter to make the first Value behind the letter P blinking. With the UP/DOWN buttons you
change the value from 1 – 4. 1-4
jump to the letter S which stands for speed. In the same way you can change now the speed from 0
31. 0 means stop, 1 is the maximum and 31 minimum
use the UP/DOWN Buttons to go on through the next menus.
6.2. Coolmode
COOLMODE
POWER
Here you can set up how the cooling should be made. There are three different modes. Please push
ENTER to access the menu, and use
POWER:
The device will be set up to a maximum dimmer value of 100% The fan runs
continuously. If the temperature exceeds 70
STUDIO:
The device is set to a maximum dimmer value
device temperature exceeds 70
the device cooling itself
REGULATE:
The device will be set up to
the temperature exceeds 4
be dimmed down
6.3. DMX Setup
DMXSETUP
M : 1 A : 0 1 1
Here you can setup your required
“M” stands for mode. Here you can choose between 1,2 and SLAVE
“A” stands for address. Here you can setup the DMX start address from 1
With UP/DOWN you can choose the setting you want. Confirm with ENTER.
6 / 10
S H O W T I M E F A C E W
Here you can chose which internal program you want to start in the automatic mode.
Push Enter to make the first Value behind the letter P blinking. With the UP/DOWN buttons you
are different programs. Push ENTER again to confirm the value and
jump to the letter S which stands for speed. In the same way you can change now the speed from 0
the maximum and 31 minimum speed. Push MENU to leave this menu. Then
o on through the next menus.
Here you can set up how the cooling should be made. There are three different modes. Please push
to access the menu, and use UP/DOWN buttons to choose one of the following modes:
The device will be set up to a maximum dimmer value of 100% The fan runs
f the temperature exceeds 70°C the LEDS will be dimme
t to a maximum dimmer value from 60%. The fan starts up when the
evice temperature exceeds 70°C. Additional the LEDs will be dimme
device cooling itself.
evice will be set up to a maximum dimmer value of 100%. T
the temperature exceeds 49°C. When the temperature exceeds 60
dimmed down.
required DMX Mode and the required start address.
ere you can choose between 1,2 and SLAVE.
tands for address. Here you can setup the DMX start address from 1 – 512.
With UP/DOWN you can choose the setting you want. Confirm with ENTER.
S H O W T I M E F A C E W W
Here you can chose which internal program you want to start in the automatic mode.
Push Enter to make the first Value behind the letter P blinking. With the UP/DOWN buttons you can
ENTER again to confirm the value and
jump to the letter S which stands for speed. In the same way you can change now the speed from 0 –
to leave this menu. Then
Here you can set up how the cooling should be made. There are three different modes. Please push
of the following modes:
The device will be set up to a maximum dimmer value of 100% The fan runs
will be dimmed down.
he fan starts up when the
ill be dimmed down to help
. The fan starts when
exceeds 60°C the LEDs will
