RCL-CXXW_EHC_Rev.0_05-12-2018
18
/
26
Option 2.
On your Computer, Smart Phone, or Tablet, select the
+ install
icon at the
bottom of the screen, then select the device you want to install. This will puts
the DSR Gateway into pairing mode. An Orange LED will start to flash on the
Gateway, you have 1 minute to add a device at this stage. For each additional
new device that is added the available time increases as you go through the
pairing process.
Pairing a Heater with the Gateway
When the Gateway is in pairing mode. Simply press and hold the OK
button
on the heater for 3 seconds until the Link symbol appears:
your heater is
now connected and ready to program through the App.
9.0 Optional Power Meter.
Note:
Installation of this device must be carried out by a competent
electrician in accordance with I.E.E. Regulations for Electrical
Equipment. BS:7671