background image

27

Flight

After installation is completed, choose a proper environment for 
flight based on the following standards.

1 . F l i g h t   E n v i r o n m e n t

1.1  GHOST might experience errors due to poor signal when flying too high or
       in an environment with dense buildings. It is suggested that you choose 
       an open area to fly GHOST to reduce drifting mistake.
1.2 Please stay away from barriers, crowds, high-tension lines, trees and 
       water.
1.3 Do not fly GHOST in restricted airspace as stipulated by laws and 
       regulations.
1.4 Please stay over 200m away from complex electromagnetic environment
       (such as a place with a signal tower or base station) in case of takeoff
       failure or crash due to intense electromagnetic interference (EMI).
1.5 Do not fly GHOST in extreme weather including high temperature, snow, 
       strong wind (over scale 5) and heavy fog. 

2 . P r e - fl i g h t   E x a m i n a t i o n

2.1 Check whether G-Box and battery are fully charged.
2.2 Check whether propellers are installed correctly.
2.3 Check whether motor starts normally after unlocking.

Please contact EHANG dealers or customer service in case of any trouble 
during installation or use. 

3 . F l i g h t   S a f e t y

3.1 Make sure that there is a minimal of 5m distance between you and 
       GHOST. Please stay away from dangerous obstacles such as barriers, 
       crowds and high-tension lines. Please be a responsible flyer. 
3.2 During the flight, keep GHOST within your sight to avoid accidents caused 
       by oversight of surroundings.
3.3 Children must be accompanied by professionals when operating GHOST.
3.4 GHOST aerial must operate without prop guards and equipped with
       landing gear; put GHOST upside down on a cotton cloth to avoid 
       scratching. 

Summary of Contents for GHOST Drone

































Reviews: