Troubleshooting
6
Problem
Cause
Correction
EGO TS doesn‘t
switch on
Power supply disabled
If necessary, replace fuse and check
all leads and connections
Ignition not on
Switch ignition on
Ignitions circuit disabled
Check cable and 1 A fuse
Your call-partner can-
not hear you
Microphone not plugged in
Connect microphone to electronics
box, defective cables require replace-
ment
Your call partner com-
plains about interfe-
rence
Microphone in air stream
Mount microphone elsewhere or
reduce ventilation
Phone too close to EGO TS
components or car radio
Increase the distance between your
phone and
the EGO TS or radio
Your call partner hears
feedback
Distance between micro-
phone and speakers too
small
Increase distance or decrease volu-
me
Volume too high
Decrease volume
Your phone cannot find
EGO TS during coupling
EGO TS already connected
to another device
Disconnect existing connection
Sound is unclear, dis-
torted
Poor Bluetooth
®
connec-
tion
Reduce the distance between your
phone and the EGO TS or remove any
(metallic) obstructions
No connection to
coupled phone when
ignition switched on
Phone is out of range.
Make sure your phone is within the
range of the EGO TS.
Phone Bluetooth
®
inter-
face is deactivated.
Switch phone Bluetooth
®
function to
”ON“ (Option ”Automatic“ is not suffi-
cient)
Phone requires confirmati-
on of connection set-up.
Confirm connection on your phone.
Deactivate security function (see
your phone manual)
One of the two devices no
longer has a valid connec-
tion code.
Repeat the coupling procedure.
16
|
17
