Installation instructions
5
Improper Installation
Improper installation may cause damages to the unit or to the vehicle! The installation
of the hands-free car kit requires special knowledge and special abilities. Short circuits
or cables connected in reverse polarity can cause severe damage to the unit. Ensure the
vehicle’s battery is disconnected before you start the installation procedure. We therefo-
re recommend to have the installation done by a professional.
Preparation
5.1
Test audio system
-
Place protective covers on seats etc.
-
Turn Off ignition
-
Installation locations
5.2
RISK OF INJURY!
Unsuitable installation locations may become a source of injury in an accident situation,
or may inhibit the correct functioning of essential safety equipment!
Checking cable lengths
5.2.1
Before you fix the components securely, check that the installation locations have been selected
in such a way that the length of the cables is sufficient to connect the individual components.
Selection of the installation location for the electronics box
5.2.2
The Bluetooth
®
antenna for the connec-
tion to the mobile phone is installed in
the electronics box. The antenna trans-
mits directionally towards the front. For
this reason, during installation, ensure
that the antenna faces into the passen-
ger cell (see Fig.). Vertical mounting is
ideal. Metallic screening between the
front panel and the passenger cell, such
as metal or metallised plastic panels,
are unsuitable and may interfere with
the Bluetooth
®
connection. Locations
behind the dashboard or in a metal-lined glove compartment are also unsuitable.
A covering in plastic, fabric or wood presents no problems whatsoever
6
|
7
