56 VOLT LITHIUM-ION CORDLESS LINE TRIMMER — ST1300E-S
5
EN
READ ALL INSTRUCTIONS!
READ & UNDERSTAND
INSTRUCTION MANUAL
Residual risk!
People with electronic devices, such
as pacemakers, should consult their physician(s) before
using this product. Operation of electrical equipment
in close proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
WARNING:
To ensure safety and reliability, all
repairs and replacements should be performed by a
qualified service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to
possible dangers. The safety symbols and the explanations
with them deserve your careful attention and understand-
ing. The symbol warnings do not, by themselves, eliminate
any danger. The instructions and warnings they give are no
substitutes for proper accident prevention measures.
WARNING:
Be sure to read and understand all safety
instructions in this Operator’s Manual, including all safety
alert symbols such as “
DANGER
,” “
WARNING
,” and
“
CAUTION
” before using this tool. Failure to following all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL:
Indicates
DANGER
,
WARN-
ING
, or
CAUTION
. May be used in conjunction with other
symbols or pictographs.
WARNING:
The operation of any
power tools can result in foreign objects
being thrown into your eyes, which can
result in severe eye damage. Before
beginning power tool operation, always
wear safety goggles or safety glasses with
side shields and a full face shield when
needed. We recommend a Wide Vision
Safety Mask for use over eyeglasses or
standard safety glasses with side shields.
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate.
Safety Alert
Precautions that involve your
safety.
Read
Operator’s
Manual
To reduce the risk of
injury, user must read and
understand operator’s manual
before using this product.
Wear Eye
Protection
Always wear safety goggles
or safety glasses with side
shields and a full face shield
when operating this product.
Wear Ear
Protection
Always wear ear protection
when operating this product.
Ø2.0 mm
Line Diam-
eter
The Diameter of the nylon
cutting line
33cm
Cutting
Width
The Max. cutting width of
line trimmer
No Cutting
Blade
Do not install metal or plastic
cutting blades
IPX4
Ingress
Protection
Degree
Protection from splashing
water
Keep
Bystanders
Away
Ensure that other people and
pets remain at least 15m
away from the line trimmer
when it is in use.
15m
Keep
Bystanders
Away
Ensure that other people and
pets remain at least 15m
away from the line trimmer
when it is in use.
V
Volt
Voltage
A
Amperes
Current
Hz
Hertz
Frequency (cycles per
second)
W
Watt
Power
min
Minutes
Time
Alternating
Current
Type of current
Direct
Current
Type or a characteristic of
current
n
0
No Load
Speed
Rotational speed, at no load
... /min
Per Minute
Revolutions per minute
