background image

56 VOLT LITHIUM-ION CORDLESS LINE TRIMMER — ST1300E-S

6

EN

IMPORTANT SAFETY INSTRUCTIONS

 WARNING: 

When using line trimmers, basic safety 

precautions should always be followed to reduce the risk 
of fire, electric shock, and personal injury, including the 
following:

READ CAREFULLY BEFORE USE

KEEP FOR FUTURE REFERENCE

 DANGER: 

Do not rely on the tool’s insulation against 

electric shock. To reduce the risk of electrocution, never 
operate the machine in the vicinity of any wires or cables 
(power, etc.) which may carry electric current.

 CAUTION: 

Wear appropriate personal hearing 

protection during use. Under some conditions and 
durations of use, noise from this product may contribute 
to hearing loss.

TRAINING

 

Read the instructions carefully. Be familiar with the 
controls and the proper use of the machine.

 

Never allow people unfamiliar with these instructions 
or children to use the machine. Local regulations can 
restrict the age of the operator.

 

Keep in mind that the operator or user is responsible 
for accidents or hazards occurring to other people or 
their property.

PREPARATION

 

Never operate the machine while people, especially 
children, or pets are nearby.

 

Wear eye protection and stout shoes at all times while 
operating the machine.

 

The distance between the machine and bystanders 
shall be at least 15m.

 

Do not use metal blades

OPERATION

 

Use the machine only in daylight or good artificial light.

 

Never operate the machine with damaged guards or 
shields or without guards or shields in place.

 

Switch on the motor only when the hands and feet are 
away from the cutting means.

 

Always disconnect the machine from the power supply 
(i.e. remove the plug from the mains or remove the 
disabling device).

 

whenever leaving the machine unattended;

 

before clearing a blockage;

 

before checking, cleaning or working on the machine;

 

after striking a foreign object;

 

whenever the machine starts vibrating abnormally.

 

Take care against injury to feet and hands from the 
cutting means.

 

Always ensure that the ventilation openings are kept 
clear of debris.

MAINTENANCE AND STORAGE

 

Disconnect the machine from the power supply 
(i.e. remove the plug from the mains or remove the 
disabling device) before carrying out maintenance or 
cleaning work.

 

Use only the manufacturer’s recommended 
replacement parts and accessories.

 

Inspect and maintain the machine regularly. Have the 
machine repaired only by an authorized repairer.

 

When not in use, store the machine out of the reach 
of children.

OTHER SAFETY WARNINGS 

 

Avoid Dangerous Environments – Don’t use trimmers 
in damp or wet locations.

 

Always turn the line trimmer off or remove the battery 
pack whenever leaving the trimmer unattended.

 

Don’t Use In Rain.

 

Keep Children Away – All visitors should be kept at a 
distance from work area.

 

Dress Properly – Do not wear loose clothing or jewelry. 
They can be caught in moving parts. Use of rubber 
gloves and substantial footwear is recommended  
when working outdoors. Wear protective hair covering 
to contain long hair.

 

Use Safety Glasses – Always use a face or dust mask if 
operation is dusty.

 

Use the Right Tool– Do not use the tool for any job except 
that for which it is intended.

 

Don’t Force the Trimmer – It will do the job better and 
with less likelihood of a  
risk of injury at the rate for which it was designed.

 

Don’t Overreach – Keep proper footing and balance at 
all times.

 

Stay Alert – Watch what you are doing. Use common 
sense. Do not operate the trimmer when you are tired.

 

Do not operate the trimmer while under the influence 
of alcohol or drugs.

 

Keep guards in place and in working order.

 

Store Trimmer Indoors – When not in use the trimmer 

Summary of Contents for Power+ ST1302E

















Reviews: