56 VOLT LITHIUM-ION CORDLESS BLOWER — LB5800E
9
EN
◾
Save these instructions.
Refer to them frequently and
use them to instruct others who may use this tool. If you
loan this tool to someone else, also loan these instructions
to them to prevent misuse of the product and possible
injury.
SAVE THESE INSTRUCTIONS!
SPECIFICATIONS
Voltage
56V
Maximum air volume at nozzle 980m
3
/h
Maximum Air Velocity
65m/s
Approx. Run Time
(with EGO 5.0Ah battery)
18min (Boost mode)
30min (High Speed)
180min (Low speed)
Maximum blowing force
18N
Blower Weight
(without battery pack)
2.18kg
Guaranteed sound power level 68dB(A)
PACKING LIST
PART NAME
QUANTITY
Blower
1
Should strap
1
Blower tube
1
Nozzle attachments
2
Operator’s manual
1
DESCRIPTION
KNOW YOUR BLOWER (Fig. A)
1. Spread Nozzle
2. Flat Nozzle
3. Blower Tube
4. Tube-Release Button
5. Base
6. Air Intake
7. Battery-ejection
8. Electric Contacts
9. Latch
10. Battery Release Button
11. Air-speed Trigger
12. Boost Button
13. Speed/Lock-on Dial
14. Shoulder Strap
WARNING:
The safe use of this product requires an
understanding of the information on the tool and in this
instruction manual as well as knowledge of the project
you are attempting. Before use of this product, familiarise
yourself with all operating features and safety rules.
ASSEMBLY
WARNING:
If any parts are damaged or missing,
do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING:
Do not attempt to modify this product
or create accessories not recommended for use with this
blower. Any such alteration or modification is misuse and
could result in a hazardous condition leading to possible
serious personal injury.
WARNING:
To prevent accidental starting that could
cause serious personal injury, always remove the battery
pack from the tool when assembling parts.
APPLICATION
You may use this product for the purposes listed below:
◾
Clearing hard surfaces such as driveways and
walkways.
◾
Keeping decks and driveways free from leaves and
pine needles.
NOTICE:
The tool is to be used only for its prescribed
purpose. Any other use is deemed to be a case of misuse.
ASSEMBLING/REMOVING THE BLOWER TUBE
◾
To Assemble (Fig. B & C)
Align the groove and push the tube onto the blower
housing until you hear a “click”.
◾
To Remove (Fig. D)
Press the tube-release button and pull the tube out.
ASSEMBLING/REMOVING THE BLOWER FLAT/SPREAD
NOZZLE
◾
To Assemble(Fig. E & F)
Align the groove in the flat nozzle with the tube knob
and push the nozzle onto the tube until it snaps into
place.
