56 VOLT LITHIUM-ION CORDLESS BLOWER — LB5800E
10
EN
◾
To Remove(Fig. G)
Press and hold the nozzle-release button to disengage
the latch, then pull the nozzle straight from the blower.
NOTICE:
Follow the same sequence to assemble or
remove the spread nozzle.
ASSEMBLING THE SHOULDER STRAP
Depress the strap hook to open it and attach it onto
shoulder-strap mount hanger on the blower (Fig. H).
INSTALLING/REMOVING THE BATTERY PACK
Charge before first use.
◾
To Install (Fig. I)
Align the battery ribs with the mounting slots and press
the battery pack down until you hear a “click”.
◾
To Remove (Fig. J)
Depress the battery-release button and pull the battery
pack out.
WARNING:
Always take care to note the location of
your feet, children, or pets when pressing the battery-
release button. Serious injury could result if the battery
pack falls. NEVER remove the battery pack when in a high
location.
STARTING/STOPPING THE BLOWER (Fig. K)
◾
Air-Speed Trigger Only
1. Depress the air-speed trigger to turn on the blower.
2. The air speed of the blower is controlled with the
variable speed trigger. More pressure on the trigger
results in higher blowing speeds, less pressure on
the trigger results in lower blowing speeds. Adjust the
speed to suit the task at hand.
3. Release the air-speed trigger to turn off the blower.
◾
Speed/Lock-On Dial Only
The blower can be turned on and locked at any speed
with the speed/lock-on dial.
1. Turn the speed/lock-on dial clockwise to start the
blower. The air speed will increase as the dial is rotated
clockwise.
2. To decrease the air speed, turn the speed/lock-on dial
counterclockwise.
3. Keep turning the speed/lock-on dial counterclockwise
to the off position to stop the blower.
NOTICE:
If the speed/lock-on dial is not turned back to
the off position before turning the blower on, the blower
will not start through the speed/lock-on dial when a
charged battery is installed. This is a protection feature
to help prevent accidental startup. Depress the air-speed
trigger can deactivate the protection.
Press the boost button while working to temporarily increase
the air speed to the maximum level. The blower will resume
the previous speed when the boost button is released.
Tips For Using The Blower
◾
To keep from scattering debris, blow around the outer
edges of a debris pile. Never blow directly into the
center of a pile.
◾
To reduce sound levels, limit the number of pieces of
equipment used at any one time.
◾
Use rakes and brooms to loosen debris before blowing.
In dusty conditions, slightly dampen surfaces when
water is available.
◾
Watch out for children, pets, open windows, or freshly
washed cars, and blow debris safely away.
◾
After using blowers or other equipment, clean up!
Dispose of debris properly.
◾
It is not recommended to use the blower at a high
speed for a long time, as large vibration and noise may
be harmful to your health.
MAINTENANCE
WARNING:
When servicing, use only identical
replacement parts. Use of any other parts may create a
hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified
service technician.
WARNING:
To avoid serious personal injury, always
remove the battery pack from the product when cleaning
or performing any maintenance.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids,
petrol, petroleum-based products, penetrating oils,
etc., come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may result in
serious personal injury.
