1202
Control console
Control console 1202. Basic operation
1202
Control console 1202. Basic operation
1202
Control console 1202. Access restrictions
1202
9
Making a call when any of the targeted
zones is in private mode
If three groups -for instance- have been
previously created:
GR 01
(
(And then the sign < appears
next to
GR 01
)
+
If, in the selected group, any of the
zones is in private mode:
If, instead of a group, a zone had been
selected which was in private mode,
the name given to that zone would
appear in the screen.
YES
will send the message to the
whole group.
NO
will send the message only to the
zones of the selected group which are
not in private mode.
1
Enabling and disabling the general
access password
If three groups -for instance- have been
previously created:
SETUP
Provided that there is NEITHER a pre-recorded
message player (1103) NOR a module for sending
messages over the telephone (1104) in the system:
MORE
PASSWORD
NO
disables the general access password.
1
+
2
+
3
+
4
will turn on the led
lamp next to
YES.
If then we press
YES
then the code
1234
has
been enabled as general access password
.
The 4 bottom keys
;
; SETUP
and
act here as numeric keys.
2
Entering the general access password
If the general access password is acti-
ve, whenever we want to access to the
advanced functions of the system, the
module for sending messages over the
telephone, or the pre-recorded
message player, a password will be
required by the following screen:
The 4 bottom keys
;
; SETUP
and
act here as numeric keys.
If we make a mistake when entering the
password, it is possible to start again
by pressing
ERASE
.
For each entered digit, a
"
"
symbol
will be substituted by a "
*
" symbol.
As long as we keep the button
pressed, what is said to the
microphone will be broadcast in all
the selected zones
.
It is also possible to select several
groups or zones, or even a combination
of groups and zones -taking into
account that if we enter a group to
select some of its zones, the selection of
that group (as a whole unit) will
automatically be cancelled-.
If the paging line is busy because
another call is being broadcast or a
pre-recorded message is being played
or saved from another console
1202
,
instead of the last two screens, the
following message will appear:
39
5
Turning a Group of zones On and
Off in a specific channel
GR 01
(
And the sign "
<
" appears
next to
GR 01
)
+
Provided that there are -for instance-
4 channels available at the system:
CHAN. 1; CHAN. 2; CHAN. 3;
CHAN. 4
turn the group ON at the
selected channel or
TURN OFF
turns
the audio OFF in the selected group.
6
Changing an audio channel from
external (AUX) music source to
internal radio
If three groups -for instance- have been
previously created:
Provided that there are -for instance-
4 channels available at the system:
CHAN. 1
Provided that there is an internal
RA-
DIO
tuner available for
CHANNEL 1
, but
the channel is in
AUXILIAR
mode
:
RADIO
(
And the sign "
<
" appears
next to
RADIO
).
7
Tuning of a channel with internal radio
Provided that there are -for instance-
4 channels available at the system:
CHAN. 1
+
or
(short press) tunes the
radio 0.1 MHz up or down.
+
or
(long press) searches for
the next available radio station in a
higher or in a lower frequency.
8
Making a call to zones which are not
in private mode
If three groups -for instance- have been
previously created:
GR 01
(
And the sign "
<
" appears
next to
GR 01
)
+
As long as we keep the button
pressed,
what is said to the microphone will be broadcast
in all the zones belonging to group
GR 01.
If the selected group is
GENERAL
the call will
be broadcast in every zone of the installation.
It is also possible to select several groups or
zones, or even a combination of groups and zones
-taking into account that if we enter a group to
select some of its zones, the selection of that
group (as a whole unit) will automatically
be cancelled-.
If the paging line is busy because another
call is being broadcast or a pre-recorded
message is being played or saved from another
console
1202
, instead of the last two screens,
the following message will appear:
Provided that there is an internal radio
tuner available for
CHANNEL 1
, and the
channel is in
RADIO
mode:
Summary of Contents for Millennium
Page 29: ......
Page 37: ...37 Reserved for new and forthcoming products ...
