E1
E3
E2
CE
CE E1
CE E2
CE E3
1103.1
Modular pre-recorded message player 1103.1
1103.1 Modular pre-recorded message player
It allows to digitally record and store in memory up to 8 different voice messages of 15 seconds long each.
Two ways of messages broadcast: 1) by programming the activation time and the recurrence intervale or, 2) detection
of any event (e.g. when pushing a button or activating a relay). In both cases the playing zone(s) are to be indicated.
Voice messages recording can be carried out from any device which gives an analogic audio signal (0.316
÷
3.16V)
or from any
1202
console by simulating a voice message broadcast.
Should the system be occupied emitting a voice message of any other kind, either through console or phone, the
pre-recorded voice message will be automatically emitted once the active voice message is finished.
Schematics
1
1103.1
2
Connection into a 19 chassis or a tabletop container
1103.1
1316
1315
TECHNICAL SPECIFICATIONS
DC power supply
Max. power consumption
CE output for E1, E2, E3 inlets
RCA input sensitivity
Rack module width
15 V
115 mA
15 V
316 mV ÷ 3.16 V (automatic)
7 UP
25
Rack fixing screw
Operating indicator led
Recording indicator led
Audio input (RCA)
for messages recording
Event 3
Event 2
Event 1
Common (Output 15 V )
14-pin connector
(to connect to
1103.1, 1104.1, 1303.1,
1304.1, 1305.1, 1306.1, 1316
modules)
Event 1
Event 2
Event 3
14-pin connector
(to connect to
1103.1, 1104.1, 1303.1,
1304.1, 1305.1, 1306.1, 1316
modules)
CPU power cord
Terminal blocks
Summary of Contents for Millennium
Page 29: ......
Page 37: ...37 Reserved for new and forthcoming products ...
