EGi Millennium 1105, User Manual

Page: 17 / 26

42
Control console 1202. Operation of the pre-recorded message player
1202
8
Recording a message
If three groups -for instance- have been
previously created:
SETUP
Provided that the general access
password is NOT active, and there is a
pre-recorded message player (1103)
in the system but NOT a module for
sending messages over the telephone
(1104):
MESSAGE
MSG. 8
MORE
RECORD
EXT MIC (And then the sign “>”
appears next to
EXT MIC)
Starts recording the message from the
gooseneck microphone in the control console
or from an external microphone connected to
the RCA socket in the pre-recorded message
player, depending on where the symbol “>” is.
As long as we keep the key pressed a
countdown -starting from 15- will let us know
the time remaining to finish up the record. The
message record will finish when the countdown
reaches 0 or when we release the button
,
whatever comes first.
If the paging line is busy because another
message is being broadcast or a pre-recorded
message is being played or saved from another
console 1202, instead of starting the record the
following message will appear:
If the general access password is active the system will require us to
introduce it every time we try to operate this module (see point 2 of
“access restrictions”).
9 Erasing a message
If three groups -for instance- have been
previously created:
SETUP
Provided that the general access
password is NOT active, and there is a
pre-recorded message player (1103)
in the system but NOT a module for
sending messages over the telephone
(1104):
MESSAGE MSG. 1
MORE ERASE
YES
erases message number 1.
10 Time setting
If three groups -for instance- have been
previously created:
SETUP
Provided that the general access
password is NOT active, and there is a
pre-recorded message player (1103)
in the system but NOT a module for
sending messages over the telephone
(1104):
TIME
+
or
–
modifies the hour.
+
or
–
modifies the minute.
adjusts the time of the system.