EGi MILLENIUM, User Manual

Page: 37 / 48

37.
RECORD
EXT MIC (And then the sign “>” appears next to
EXT MIC)
Starts recording the message from the gooseneck
microphone in the control console or from an external
microphone connected to the RCA socket in the pre-
recorded message player, depending on where the
symbol “>” is.
As long as we keep the key pressed a countdown
-starting from 15- will let us know the time remaining to
finish up the record. The message record will finish
when the countdown reaches 0 or when we release the
button
, whatever comes first.
If the paging line is busy because another message is
being broadcast or a pre-recorded message is being
played or saved from another console 1202, instead of
starting the record the following message will appear:
8 Recording a message
If three groups -for instance- have been previously
created:
SETUP
Provided that the general access password is
NOT active, and there is a pre-recorded message
player (1103) in the system but NOT a module for
sending messages over the telephone (1104):
MESSAGE
MSG. 8
MORE
Control console. Operation of the pre-recorded message player
1202 If the general access password is active the system will require us to introduce it every
time we try to operate this module (see point 2 of “
Access restrictions
”).
9 Erasing a message
If three groups -for instance- have been previously
created:
SETUP
Provided that the general access password is
NOT active, and there is a pre-recorded message
player (1103) in the system but NOT a module for
sending messages over the telephone (1104):
MESSAGE MSG. 1
MORE ERASE
yES erases message number 1.
10 Time setting
If three groups -for instance- have been previously
created:
SETUP
Provided that the general access password is
NOT active, and there is a pre-recorded message
player (1103) in the system but NOT a module for
sending messages over the telephone (1104):
TIME
+ or – modifies the hour.
+ or – modifies the minute.
adjusts the time of the system.