EGi DOMOS2, User Manual

Page: 76 / 80

www.egiaudio.com
•
Module software version.
• Language selection.
To configure these parameters, do as follows:
DATE ADJUSTMENT
1.
Press
MENU
key several times until
ADJUSTMS
is displayed.
2. Press (OK/+) for at least 2 seconds. TIME is displayed and the hour digit blinks.
3. Press (OK/+) and (NO/–) to adjust the hour and press MENU key .
4. MINUTES is displayed. Adjust the minutes following step 3 and then, press MENU key again
to adjust the day, month, weekday and year.
RELAY ASSIGNMENT
40510 Domotic central unit has a local relay that can be activated if a specific
alarm goes off or any of them. To configure this parameter, do as follows:
1. Press MENU key several times until ADJUSTMS is displayed.
2. Press (OK/+) for at least 2 seconds. TIME is displayed and the hour digit blinks.
3. Press MENU key several times until RELAY OUT is displayed.
4. Press (OK/+) and (NO/–) to program the relay in order to activate it, if
a specific alarm goes off (fire, intruder, gas, etc.), or any/none of them.
40510
auxiliary modules
76
A D J U ST M T I M E
1 0 : 0 3
M I N U T E S
1 0 : 0 3
D A T E
1 2 : 7
M O N T H
1 0 : 7
T H U R S DAY
1 2 : 7 2 0 0 7
Y E A R
A D J U ST M V E R- 1
1
SOFTWARE VERSION
1. Press MENU key several times until ADJUSTMS is displayed.
2. Press (OK/+) for at least 2 seconds. TIME is displayed and the hour digit blinks.
3. Press MENU key several times until VERS is displayed.
1
st
2
nd
1
st
2
nd
1
st
2
nd
1
st
2
nd
1
st
2
nd
1
st
2
nd
1
st
2
nd
R E L a y
G A S
A d j u st m
1
st
2
nd
1
st
2
nd
1
st
2
nd
1
st
2
nd