www.egiaudio.com
40520
interface modules
66
After a few seconds,
PIN OK
confirmation message or an error message will be displayed.
If the error message shows
1
, the PIN code has been incorrectly introduced. Check the PIN code.
If the error message shows
2
, the time allowed for the process has been exceeded. Try to repeat the process
again. If the problem persists, contact your installer.
The second step is to activate the
GSM
option and
SMS
messaging. Please do as follows:
1.
Press the
MENU
key until
GSM
is displayed.
2.
Long press on
(OK/+)
until
SET SMS
is displayed.
3.
The following step is to configure the list with the incoming/outgoing telephone numbers via SMS
messaging. Please do as follows:
•
Press the
MENU
key until
SET GSM
is displayed.
•
Long press on
(OK/+)
until
SET SMS
is displayed.
•
Then, the GSM module will receive the numbers authorized to call the GSM module and the
numbers authorized to receive calls from it via SMS.
The phone numbers are sent in priority order via SMS text message. An
example
is given below:
•
Write the SMS message with the following text:
i655432111 i699876543 b693214569 o660123456 o987654321
•
Send the SMS text message to your GSM module.
1.
Press the
MENU
key until
GSM
is displayed.
2.
Press
(OK)
to access to the screen. Introduce the PIN code of the card that has been inserted into the
GSM module.
3.
Press
(OK/+)
and
(NO/–)
to search the number that corresponds to the first digit of the PIN code. Press
MENU
to confirm the first digit and search the second one. Repeat this step for the third and fourth digits.
4.
Long press on
(OK/+)
to transmit the PIN code to the GSM module.
i
Incoming The telephone can call the module.
o
Outgoing The telephone can receive calls from the module.
b
Both.
The telephone can receive calls from the module and call it.
INCOMING
(the module will accept calls
from these phone numbers)
655432111
699876543
693214569
OUTGOING
(the module will call to these
phone numbers)
693214569
660123456
987654321
G S M
P I N
0 0 0 0
P I N
5 6 7 1
P I N O K
The message must be as follows:
NOTE:
The phone numbers are used only as an example. (You must write
the SMS with the phone numbers of your choice).
3.
If everything is correct,
SET GSM OK
will be displayed; if an error has
occurred,
NOOK
will be displayed.
1
st
2
nd
2
nd
1
st
Summary of Contents for DOMOS2
Page 1: ...english user s manual ...
