3.1 Cleaning
Daily cleaning will extend the life of the Salt and Sand
Spreader significantly and ensure correctly functioning
parts.
D
Da
aiillyy c
clle
ea
an
niin
ng
g::
A) Remove and clean the snap couplings.
B) Remove the rear guard to clean under it. (Picture 1)
C) Dismount the Salt and Sand Spreader from the
basic unit. See section 2.2.
D) Clean the Salt and Sand Spreader thoroughly with
water to ensure that all salt residue etc. has been
removed from the container, chute, and deflector
plate and from under the attachment. (Picture 2)
Remember to also clean the basic unit thoroughly.
13
3. SERVICE AND MAINTENANCE
Remove the rear guard
Clean
1
2
