Egholm 2001, Operator'S Manual

Page: 10 / 20

2.4 Adjustment
A Am mo ou un ntt s sp prre ea ad d::
To adjust the amount spread, turn the front knob on
the left-hand side of the spreader. (Picture 1)
Turn the knob clockwise to reduce the amount spread
per m
2 .
Turn the knob counter-clockwise to increase the
amount spread per m
2 .
For additional details about spread settings, see the
enclosed spreading chart.
S Sp prre ea ad d w wiid dtth h::
Spread width is the width of material spread by the
spreader. The material will be spread in a semicircular
pattern with equal amounts spread on either side of the
basic unit.
To adjust the spread width, turn the rear knob. The
spread width is adjustable from 1 to 5 m. (Picture 2)
Turn the knob clockwise to decrease and counter-
clockwise to increase the spread width.
For additional details about spread settings, see the
enclosed spreading chart.
S Sp prre ea ad d p pa atttte errn n::
The spread pattern refers to the way the material is
spread on the ground, when the basic unit is not
moving. Let the basic unit stand still for a few seconds
and the spread pattern will be visible on the ground. To
achieve an even spread pattern, turn the adjusting
knob on the back of the Salt and Sand Spreader.
(Picture 3) This will alter the spread pattern.
Turn the knob clockwise to increase the amount spre-
ad to the left.
Turn the knob counter-clockwise to increase the
amount spread to the right.
For additional details about spread settings, see the
enclosed spreading chart.
Amount spread
Spread width
Spread pattern
10
2. INSTRUCTIONS FOR USE
3
2
1