Egg Medical Eggnest XR 2.0, User And Service Manual

Page: 14 / 31

4. Attach the Side Flex Shields onto the around the EggNest XR
Platform
There are two Side Flex Shields and that need to be placed on the Side Rail of the EggNest.
These are marked with either a “Left” or “Right” sticker. In addition, there are two Head Flex
Shields that need to be attached and secured to the head and shoulder area of the EggNest.
a. Attach the Left and Right Side Flex Shields to the rail on the side of the Egg Nest XR™
Platform.
b. The existing Table Shield (also referred to as the Table Skirt) should be positioned slightly
outside of the Side Flex Shields, overlapping the two shields.
c. Attach the Left and Right Side Head Shields to the head rail by placing the “U” channel over
the rail at the head of the Egg Nest XR™ Platform. Insure that the channel over the rail is
securely in place. Tighten set screws on the Head Shields
Figure 14: Attaching the Side Flex Shields to the rails on the
patient ’s right side of the EggNest XR™ system
Figure 15: Place the Head Flex Shield on the head rail and secure it by tightening knobs