Egg Medical Eggnest XR 2.0, User And Service Manual

Page: 19 / 31

19
7.
If a radial approach is anticipated, position the Arm Board. Rotating the Arm Board out from
the table can most easily be accomplished by pulling the handle below the Arm Board. The
handle travel will stop when the shield is rotated about 30

out from the Egg Nest XR™ . If
more abduction is desired, the Arm Board will continue to rotate, but x-ray visualization will be
impaired.
8.
Once the patient is resting on the Egg Nest XR™ raise all the flip shields (left and right Arm
Board, Workbench, left and right Head Corner Shield and Pillow Shield.) Then position the
Clear Spot Shield along patient abdomen to align with hanging shield.
After transferring the patient to the Egg Nest XR™ and positioning the shielding, the sterile
drape can be placed using hospital policy. The edges of the drape should extend over the
Egg Nest XR™ Arm Board and Workbench flaps, and over the Workbench itself.
Figure 22: Patient Safety Velcro strap