Setting the rotation direction
The rotation direction is set with the reverse slide 2 (see fig. 4).
F
“Forward“ means
rotation direction right
.
R
“Reverse“ means
rotation direction left
.
Actuate the reverse slide only when the pneumatic torque wrench is switched off.
Rotation direction right
: For screwing-in of screws and nuts turn the reverse slide clockwise to
F
.
Rotation direction left
: For unscrewing of screws and nuts turn the reverse slide anticlockwise to
R
.
The air regulator (power adjustment) is only for adjusting the output of the torque wrench, not for
the adjustment of a constant torque (see fig. 5).
Remark
: The required torque adjustment and the duration of the screwing process are depended on
the type of screw connection. Ideally, this can be found out in practice.
Put the power socket wrench solidly and correctly on the screw head or the nut and start the
pneumatic torque wrench. (fig. 6)
Fig. 5
Fig. 6 Press or release
Start and stop
4
Insert tool
Slide the tool over the drive square 7 of the tool holder. Before, mount the counter bracket 8 (see
fig. 7).
7
8
Fig. 7
