23
Rotary
Switch
Positions
Functional Buttons
SELECT
RANGE
HOLD
%Hz
ZERO
V
●
●
●
●
●
●
●
N/A
●
●
N/A
●
Ω
N/A
●
●
●
N/A
●
%Hz
N/A
N/A
●
N/A
●
N/A
40A
●
N/A
●
●
●
●
400A
●
N/A
●
●
●
●
1000A
●
N/A
●
●
●
●
ºC
N/A
N/A
●
●
N/A
N/A
MEASUREMENT OPERATION
A. DC/AC Voltage Measurement
(see figure 3)
figure 3
Warning!
To avoid harms to you or damages to the Meter from eletric shock, do not
attempt to measure voltages higher than 750V AC or 1000V DC, although
readings may be obtained.
To measure DC/AC voltages, connect the Meter as follows:
1. Insert the red test lead into the
VΩHz
terminal and black test lead into the
COM
terminal.
2. Set the rotary switch to
V
. DC mesaurement mode is a default. Press
SELECT
to switch to
AC measurement mode. Press
RANGE
to enter manual ranging.
3. Press %Hz button to measure frequency or duty cycle, but the frequency or duty cycle
readings obtained from this range is only for reference.
4. Connect the test leads across with the object being measured. The measured value shows on
the display.
