Ensure you do NOT raise the seat post pass the safety mark etched on the seat posts.
Ensure that your assembled accessory does not interfere with the steering, braking or the
natural movement of the bicycle.
Electric Motor and Battery Features
High efficiency and power saving Electric Motor–
A Brushless Motor with gears
High efficiency of up to 85%.
Efficiency>80%. 36v battery for a continuous run range of more than 40 miles on a single
charge in pedal assist mode.
Produces a continuous and sustained power of 350 Watt power with a peak of up to 600
Watts.
High power and high torque –
Fast pick up even under heavy load. Easily climb and ascend sloppy terrains.
Low power consumption, Long-battery life and a Compact design.
The 36 volt Battery pack weighs 8 Lbs.
Trouble-free, Low maintenance, Long life span and Easy to maintain electric motor –
High Quality Brushless Electric Disc motor with an advance speed sensor and gears.
Closed system motor requires only surface cleaning and dry storage.
Charging the Battery
Connect the Charger to the wall outlet first before connecting the Charger to the Battery.
Ensure the Charger is firmly plugged into the Wall outlet.
Ensure the Charger output terminal and the Battery input terminal are firmly mated to each
other.
When the charger is plugged into a wall outlet, the charger LED indicator will turn solid RED to
indicate that the battery is charging.
The Charger LED indicator will turn GREEN when the battery is fully charged.
Disconnect the charger from the wall outlet before disconnecting the charger from the battery.
To ensure long battery life, fully charge the battery for at least twelve (12) hours during the first
initial three charges and fully charge the battery at least once every 2 months
! NOTE: Only charge the battery pack using the supplied charger.
! NOTE: Always plug the charger onto the Battery pack before plugging the charger to the wall
socket.
! WARNING: Do NOT leave the charger plugged into the wall out let charging the battery for
more than 24hrs at a time for risk of damaging the battery.
Repair and Service
！
WARNING:
Inspect the bicycle frequently. Failure to inspect the bicycle and to make repairs or
adjustments, as necessary, can result in injury to the rider or to others. Make sure all parts are
correctly assembled and adjusted as written in the owner’s manual.
Immediately replace any damaged, missing, or worn parts.
Make sure all fasteners are correctly tightened as written in the owner’s manual
Parts that are not properly tightened can be lost or operate poorly.
Do not over tighten parts, as over-tightening may damage the part.
8
