Depress the thumb throttle in any increments of power you desire to power the motor of the
bicycle and it will take off as demanded.
This mode can be used in conjunction with any of the above modes as the amount of motor
power supplied while twisting the thumb throttle overrides all PAS modes the system is set
to.
You can engage this mode whenever you want as long as the system is turned “ON”.
While peddling will lighten the motor load and assist lower the demand on the electric
motor, you do not need to pedal in this mode of operation.
! CAUTION: This mode is designed to achieve a speed of 20 MPH. User discretion is
advised
The motor will NOT stop when you stop peddling while the thumb throttle is engaged.
The motor will stop if the brake lever is depressed even if the thumb throttle is engaged.
! CAUTION: Remember to let go of the thumb throttle when getting on or off the bike
weather or not the brake levers are engaged.
In this mode, the electric bike will use the most amount of battery power it will use the most
amount of battery power compared to any PAS modes on this bike.
This mode will give you the least “miles per charge” compared to any of the above modes
of operation
To assist the motor from a dead stop in this mode, it is suggested to gear down to lower
gears before stopping your bike.
About the Brake Safety Feature on all our Electric Bikes.
ALL our electric bikes make use of a wired brake lever kill switch for safety purposes. When
the brake lever is engaged, it sends a kill signal to the controller to disable the motor under
all circumstances and condition. This will ensure the motor does not continue to spin when
you need the bicycle to stop.
4
