9
Step 4:
The
Pedals (No.8L/R)
are marked "L" and "R" for
Left and Right. Make sure you attach the correct
pedal to the corresponding crank. Attaching the
pedal to the wrong crank can cause irreversible
damage to both the pedal and the crank. The
Nuts (No.9L/R)
are preassembled to
Pedals
(No.8L/R)
.
Attach
Left Pedal (No.8L)
to
Left Crank (No.29
).
Turn the
Left Pedal (No.8L)
counter-clockwise
with the hand until it is tight, then use the
Crosshead Spanner (No.88)
to securely tighten.
Use the
Crosshead Spanner (No.88)
to hold the
bolt of the pedal in place, then use the
Open
Wrench (No.89)
to screw the
Nut (No.9L)
tightly
in a
clockwise
direction to the thread end of the
Left Pedal (No.8L)
.
Attach
Right Pedal (No.8R)
to
Right Crank
(No.28).
Turn the
Right Pedal (No.8R)
clockwise
with the hand until it is tight, then use the
Crosshead Spanner (No.88)
to securely tighten.
Use the
Crosshead Spanner (No.88)
to hold the
bolt of the pedal in place, then use the
Open
Wrench (No.89)
to screw the
Nut (No.9R)
tightly
in a
counter-clockwise
direction to the
thread end of the
Right Pedal (No.8R)
.
Remove 2 pre-assembled
Screws (No.42)
and 2
pre-assembled
Flat Washers (No. 43)
from the
Main Frame (No.1)
.
Then attach the
Bottle
Holder (No.65)
to the
Main Frame (No.1)
using
the 2
Screws (No.42)
and 2
Flat Washers
(No.43)
that are removed. Tighten with a
Crosshead Spanner (No.89)
.
Assembly is complete!
Summary of Contents for IC028
Page 3: ...3 EXPLODED DRAWING ...
